Features

-It uses high-frequency, high-voltage DC power and provides clear images.

-Using high-frequency, high-voltage DC power, the X-ray generator transmits X-ray through human body to linear CCD sensor. Then, built-in software is used to convert digital signals and thus acquire vivid images. Sophisticated X-ray generator in consideration of patient's health, which can reduce generation of ineffective "soft" X rays.

-Small-focus X-ray tube of TOSHIBA (Japan) is used to obtain clear X-ray images.

-Dental X-ray tube with effective focus as 0.5mm is used, and constitutes "heart" component of X-ray generator. The smaller the focus is, the lower probability of generating defect (such as penumbra around the image (artifact)) will be; thus, it will be more likely to present clear and vivid images.

-Operation panel is used as the operation interface, so operation is more humanized.

-Used as user operation interface, the operation panel makes man-machine interaction more friendly and conforms to the concept of humanized design. Operation is easy. Switch between each function is interlocked to prevent misoperation.

-Optimal irradiation parameters can be set according to differences between patients in body type, age and etc.

Technical Specifications

Name	Technical parameter
Power supply	220V±22V, 50Hz±1Hz, Internal resistance ≤1Ω, single phase
Input power	2500VA
Fuse	15A (ф6×30)
Tube voltage	60kV～84kV, Error ≤10%, step 2kV
Tube current	Panorama: 12mA ±20%
X-ray tube	TOSHIBA, D-054SB, target material: tungsten; target angle 5º
Focus size	0.5mm
Magnification	1.20-1.30
Total filtration	2.5mm Al
Exposure time	Panorama: 18 seconds; temporomandibular joint: 3 seconds x4
Spatial resolution	≥2.0 LP/mm
Low contrast resolution	1mm～2.5mm
CMOS pixel size	100um×100um
CMOS pixel count	1480 x 60
CMOS imaging area	151.2 x 6.0mm
Maximum vertical stroke	≥500mm
Lifting device	Electric lifting, mechanical self-locking
Weight	220kgs