Products
-
- Operating Theatre Equipment
- Anaesthesia Machine
- Ventilator
- Defibrillator
- Electrosurgical Unit
- Ultrasonic Scalpel
- Patient Monitor
- Medical Pendant
- LED Operating Lamp
- Operating Lamp
- Operating Table
- Delivery Table
- Suction Unit
- Syringe Pump
- Infusion Pump
- Feeding Pump
- Blood Infusion Warmer
- Operating Microscope
- Shockwave Lithotripter
- Surgical Tools
- OB/GYN Equipment
- Diagnostic Equipment
- Sterilizer (Autoclave)
- X-ray Series
- Laboratory Equipment
- Biological Microscope
- Spectrophotometer
- High Speed Centrifuge
- Low Speed Centrifuge
- High Speed Freeze Centrifuge
- Low Speed Freeze Centrifuge
- Special Centrifuge
- Thermostatic Bath
- Laboratory Shaker
- Laboratory Mixer
- Water Distiller
- Magnetic and Electric Stirrer
- Laboratory Incubator
- Dry Oven
- PH Meter
- Biological Safety Cabinet
- Laminar Flow Cabinet
- Water Purifier
- Ultrasonic Cleaner
- Pipette
- Microtome
- Medical Hand Sink
- Medical Freezer
- Blood Bank Refrigerator
- Medical Pharmacy Refrigerator
- Analysis Balance
- Medical Destroyer
- In-Vitro Diagnostics
- Hemodialysis Equipment
- Hospital Furniture
- Walking Aids
- First-Aid Products
- Medical Endoscope
- Medical Human Model
- Ophthalmic Equipment
- Dental Equipment
- ENT Equipment
- Home Care Equipment
- Veterinary Equipment
- Medical Consumables
- Personal Protective Equipment
- Operating Theatre Equipment
Application and feature
Electric surgical drill&saw is one of power tools widely used in orthopedic operation. Gradually replaced traditional industrial drill and saw, it can be autoclaved up to 135°C high temperature and 1.6Mpa high pressure. Some of bacteria can be killed by high temperature and pressure, fumigating can not do. Meanwhile, it can shorten sterilization time. Under high temperature and high pressure, just need 20 minutes, win the valuable time for the patient. The device is optional, good looking, small size, light weight, no wires, easy to carry, safe operation.
Item
Content
Specifications
Hand Piece
Working voltage
14.4V
Output power
≥20W
Unit rise in temperature
≤20°C
Charger
Input voltage
AC220V,50Hz
Output power
14.4V, 900mA
Input power
30VA
Battery
voltage
14.4V
Charging time
About 3 hours
Canulate Drill
Output voltage
100W
torque
12.5/7.5 N.m
Rotating speed
0-650/1000rpm
noise
≤45dB
Standard
configuration
One drill unit
One charger
Two batteries
Two aspetic battery transfer rings
One drill chuck key
One instruction manual
One Aluminum case